Viridian Balustrade System™

Balustrades with unrestricted views

Description

This free standing glass balustrade system uses the structural strength of Viridian VTough™ to produce clean, dramatic and cost effective balustrades. The system minimises framing, creating light clear spaces. Alternatively, VTough and Viridian VLam™ glass can be bolt-fixed or installed within framed sections.

Technical details

The Viridian Balustrade System™ consists of 10mm, 12mm, or 15mm toughened glass that may also require laminating depending on application. The glass is set upright in a groove in structural concrete or a steel channel.

The glass panels are located on neoprene setting blocks and a special non-shrink grout is used. The grout is capped off with a silicon cap. The channel must be designed to resist the turning moments applied to the balustrade.

Important considerations

• Standards AS1288 and NZS 4223 with design loads from AS/NZS 1170.1 must be complied with
• If the balustrade is protecting a difference in level of more than 1000mm, a separate handrail capable of withstanding the design load independent of the glass must be used. Please consult with Viridian for details
• The designer must determine that in the case of accidental or deliberate damage, any falling glass can cause no public danger. In these situations Viridian recommends the use of a toughened, laminated glass or fully framed laminated glass
• Exposed edges of laminated glass are not recommended
• Viridian recommends all toughened glass used in frameless or bolted structural balustrades be specified as Viridian Heat Soak treated. Note: this is a Viridian warranty requirement

Benefits

• Clear, unrestricted views
• Glass panels provide wind break
• Can be designed for bolted or freestanding applications